News
What to do if the toilet lid is broken
Release time:
2023-09-26 17:11
Source:
1、 What to do if the toilet cover is broken - remove the screws
When replacing the toilet cover, simply remove the fixed bolt in front of the toilet to stop the replacement. When the device is installed, it can be operated in the opposite direction. Most toilet covers are of no size, just adjust the two bolts when installing them. However, it is also necessary to measure the size, screw hole spacing, width and length of the toilet cover before purchasing a new one and stopping the replacement. At the beginning of installing the toilet cover, it is necessary to remove the fixing bolts in front of the toilet, rotate around the toilet, see where the screw cap of the toilet cover is located, select a suitable wrench, remove the screw cap, and then replace it with a new one.
2、 What to do if the toilet lid is broken - replace it with a new one
The status of ordinary screw caps is difficult to find, some in the open and some in the dark. Screw the cap in the dark, on the side of the toilet next to the water tank, and flip the cover open. By reaching out with your hand and touching it upwards or towards the water tank, you can touch it, but it is invisible. Find the screw cap, use a mobile hand to remove it, and then replace it with a new one. The status of ordinary screw caps is difficult to find, some in the open and some in the dark. Screw the cap in the dark, on the side of the toilet next to the water tank, and flip the lid open. By reaching out with your hand and touching it upwards or towards the water tank, you should be able to touch it, but it is invisible.
3、 What to do if the toilet cover is broken - adjust the bolt
It should be noted that most toilet covers are not of any size, so just adjust the two bolts when installing them. But it is also necessary to measure the size, spacing between screw holes, width and length of the toilet cover, and purchase a new toilet cover to stop replacing it. Different styles of toilet lid devices also have different settings. In general, the bottom of the toilet lid is connected to the toilet, and the front is screwed up. Just reach down and find the screws on both sides to unscrew the entire lid. It is very complex, and you can try it out.
How to use and maintain the toilet?
2023-07-07
Do not knock or step on the Wrigley toilet during normal use; when closing the toilet cover after use, be gentle, not fast and violent.
Learn More +A Toilet Seat That Never Loosens or Wiggles
2023-07-07
We knew there had to be a better, permanent way to fix loose toilet seats
Learn More +